Kit H0 (1:87)                                                                      Water tower Krebsöge                                                  Dimensions: length 82mm, width 82mm, height 130mm

The water tower is part of a two-part kit "Krebsöge", consisting of workshop (Item No.: 19003) and water tower. Both kits are of course also available separately.

Until its dismantling, the prototype stood between the branches of the Wuppertalbahn in the direction of Lennep and Radevormawald on the site of the Radevormwald-Krebsöge station. The typical small water tower, which was often built in this dimension, is well suited for branch lines, but also suits narrow gauge railroads. It was demolished during the construction of the Wuppertal dam in the early 1980s

Kit H0 (1:87)                                                                    Garden arbor set 1, (3 houses)                                         Dimensions per arbor: L 57 x W 40m x  H 46mm           The set consists of three differenten versions, one building each in the structure "wood", "plaster", "brick". Please refer to the attached photos for the color scheme.

Garden arbors / allotment garden houses, as they are still often found today next to the tracks. Are ideal for existing layout gaps that have not yet been properly staged. 

Kit H0 (1:87)

2 Garden houses "Anno 1950" Dimensions of each house in mm: length 55, width 47, height 40 

Garden houses as they are typical for the 1950s. Elaborately engraved tar roof, "stone slabs" for building a terrace each and a small pergola are included in the kit.

Kit H0 (1:87)                                                                    Post 210                                                                            Dimensions in mm: length 70, width 60, height 55 (including chimney).

This small barrier post stood until its demolition near Rheine on the Emsland line. It was used to monitor the level crossing at Lessingstraße.

Kit H0 (1:87)       

Signal box Bulla, brick red                                                    Dimensions in mm: L 100 x W 43 x H 100 Floor space 92 x 23 mm

The prototype for our signal box Bulla stood in the station Warstein. Due to its extremely narrow design, the signal box can be nicely built between 2 tracks. The original was unfortunately demolished a few years ago in the course of reconstruction work in the track area.

(alt.: Art. 19009 Bulla signal box with beige bricks)

Kit H0 (1:87) 

Station with goods shed Dimensions in mm:: length 425, width 160, height 138.

Very finely textured kit with intricate slate and decorative paneling. The station can also be built mirror-inverted, with the shed on the right side.

The prototype for this kit was located on KBS 403 between Wuppertal and Radevormwald. The line was closed in 1980, the station was demolished a little later. With its combination of slate and wood cladding is a typical example of stations from the Bergisches Land.  

Kit H0 (1:87)                                                                  freight shed with loading ramp                                   Building dimensions: L 158 x W 93 x H 74mm             Ramp: L100 x W 77 x H 12mm

Small freight shed which is also ideal for a branch line or narrow gauge railroad due to its narrow construction. Completely designed roof truss. The loading ramp can also be placed separately.

From the style this small goods shed could stand in southern Germany or even on the Lower Rhine

Kit H0 (1:87)
Extension for the large wagon shed Art. 19015

Dimensions extension: L 450mm, W 230mm, H 130mm

Kit H0 (1:87)                                                                          Box car derelict on sleepers                                                   dimensions in mm: length 106, width 33, height 33

Another model in our series of dilapidated, converted goods wagons. This one was set down on a sleeper pile and is now used for storage or similar. Finely engraved structures

Kit H0 (1:87)                                                                station hall                                                                  Dimensions in mm: length 640, width 480, height 260.

Basic kit with 5 pier arches, 2 "sheet metal facades" with walkways. Sides with 2 straight elements and one dormer each. Roof construction with 8 removable skylights. The hall spans up to 6 tracks (4 tracks in the original) and is prepared for overhead line operation. The entire hall is easily visible through side windows and skylights. The pier arches are kept very delicate, but support the complete roof structure.

The hall can be extended and/or widened, this must be planned before assembly!                                     s. Article 19021/19022/19023                                        More information about the extension/widening can be found here, more pictures here

Kit H0 (1:87)                                                                Widening of Leipzig station hall Art.19020                 Dimensions in mm: L 640 x W 480 x H 260                

Extension kit with 5 pillar arches, 5 special intermediate pillars for connection to the concourse 19020 The pillars replace 5 piers in the basic kit. 2 sheet metal facades with walkways, no side elements, roof construction with 8 removable skylights.                    

Because the facade elements of the basic kit (item 19020) move to the outside here, the extension must be planned before assembly.                                         More information about the extension/widening can be found here, more pictures here 

Kit H0 (1:87)                                                                  side hall Leipzig                                                            Dimensions in mm: length 640, width 175, height 145

5 filigree hall arches, which can be seamlessly attached to the main hall. Engraved roof and fine sheet metal facade with walkway. Extension to our Leipzig Station kit Art.19020 ff. Photo shows 1/4 of the entire kit

More information about the station Leipzig can be found here, more pictures here

Kit H0 (1:87)                                                                          Signal box KDA AL                                                            Dimensions in mm: length 234, width 73, height 88. 

The signal box still stands on the site of the BW Düsseldorf-Oberbilk between the wagon hall and the turntable.

Matches administration KDA item 17049 and boiler house KDA item 17038

Kit H0 (1:87)                                                                      small bridge with bridge heads                                        Dimensions: bridge L 50mm, bridge heads H 60mm,can be shortened.

This bridge is intended as a small culvert for branch lines. Plastic engraved bridge heads are included in the kit. These are 60mm high and can be shortened as desired. The steel girders are very finely engraved and are a real eye-catcher.The bridge is also available in 100mm length - Art. 19101 

ATTENTION: Kit is not suitable for the Märklin/Trix C-track

Kit H0 (1:87) bridge with bridgeheads Dimensions in mm: length 330, width (roadway) 40,height of downstand beam 30, clearance height 80.

Large sheet metal girder bridge, the model is designed so that you can lay the track in a slight radius.

The prototype for this bridge was located on the S 403 above the Kräwinkel station. It was built in 3 parts and crossed the Wupper near Radevormwald.

matching bridge piers see art. 19103

Kit H0 (1:87)                                                                        wooden bridge                                                                   Dimensions in mm: L 60 x W 37 x H 32 

scale construction, elaborately designed wooden replica, lateral retaining walls made of quarry stone replica

Kit H0 (1:87)                                                                     corrugated iron shed                                                             L 95mm x W 35mm x H 35mm

Small railroad building constructed after an old photo, the two parts of the building can also be placed separately, versatile at the railroad, in industry or even in the backyard.

Kit H0 (1:87)                                                           warehouse building with loading ramp and attached staircase                                                                          Dimensions in mm: L 243 x W 85 x H 142

Workshop or warehouse building with loading ramp and attached staircase. The back front is smoothly plastered, front and side front are tiled, 1st and 2nd floors are timber-framed. The staircase can be attached to the side or front (or omitted).  This type of construction was widely used. Our prototype was in Wuppertal, similar buildings can be found all over Germany. The kit fits perfectly to our other storage buildings. ( Art No 17079/17078)

kit H0 (1:87) Finely engraved slate structure, beautiful portal with elaborately designed skylight, protruding outside staircase with wrought-iron railing.

Size in mm: L 195 x W 168 x H 190

Kit H0 (1:87)                                                                      Small workshop                                                                 Dimensions in mm: L 130 x W 75 x H 50

Workshop building with office extension, simply plastered. Workshop with 2 large gates, which can be installed open. Due to generous skylights and windows ideal for an interior. A building that can be used from epoch II.

kit H0 (1:87)  length 430mm, width 85mm, height 270mm