Small factory building with rooof container,

kit H0 (1:87), length 155mm, width 66mm, height 145mm

Backside with attached concrete stairs. The original is
located at coking plant „Hansa“ and contains their
anthracene oil regeneration. Interior consists of 3 vertical
tanks with ladder and walkway.

small coal dispatch/"Landabsatz" concrete finish, kit H0 (1:87), Dimensions: length
142mm, width 75mm, height 120mm. Vertical clearance
(with chutes folded) 44mm

The chutes can be installed movably. The back wall is fully formed, so the building can also be placed separately. Suitable for art.no. 17015 coal washing

Kit H0 (1:87), dimensions in mm: Ø 450 (+ lift) x H 600

Basic kit consists of 3 rings and roof ring

Gasometer based on model photos of the Hansa coking plant, type MAN

A so-called disc gas container, the gas pressure was obtained by a movable sealing disc, which was on the gas. The sealing apron was pressed with tension springs and weights to the outer wall of the container. To seal the apron was covered about one meter high with an oily sealing liquid. For air circulation and pressure equalization, there were ventilation openings at the upper edge of the roof hood. Our kit is also available as a semi-relief Art. 17053.

available from august 2022

Kit H0 (1:87), dimensions in mm: W 450 x D T225 x H 600

Space-saving relief basic kit consists of 3 half-rings and half roof ring including staircase / elevator tower

Gasometer based on model photos of the Hansa coking plant, type MAN

A so-called disc gas container, the gas pressure was obtained by a movable sealing disc, which was on the gas. The sealing apron was pressed with tension springs and weights to the outer wall of the container. To seal the apron was covered about one meter high with an oily sealing liquid. For air circulation and pressure equalization, there were ventilation openings at the upper edge of the roof hood.

Available from August 2022

converter hall, kit H0 (1:87) length 850mm, width 500mm, height 500mm

The converter hall is slowly taking shape, the shell shown here is still without a facade. The (separately available) interior is visible through large windows. The kit, however, is designed so that you can leave parts or the entire facade away to allow an even better view. The device Art. 17106 includes 2 converters with dust bags, 3 different cranes, stair towers, slag and pig iron carts, exhaust for the torpedo filling system, exhaust ducts and much more. The kit of the empty converter hall can be extended by 150mm or a multiple with other elements Art. 17112.

Available from August 2022

Kit H0 (1:87), dimensions in mm: L 220 x W 110 x H 190

Dry dust filter system for various air or gas contaminants. The role models are as diverse as the different filter options. Our kit can be built twice as long as a half-relief. The disposal of the filter dusts may e.g. done via containers or via laxative pipes. A nice addition to our converter hall (then in duplicate), but also for many other industrial plants.

Kit H0 (1:87)                                                                                                            L 242 x W 70 x H 135 mm (without canopy)

Kalina half-timbered black/white                                                                          with two large gates and canopy, with its small depth ideal for perimeter buildings or backyards on the model railway layout. Matches our other workshop/storage buildings of the Kalina series, e.g. art. 17078/17079 Backyard workshop in brick or plaster, or art. 17137 Brick/ half-timbered)

large steel chimney kit H0, size in mm L 80 x wW 80 x H 680

Substructure with steel framework, chimney pipe (consists of plastic), stairways and 2 circumferential platforms with fine openwork lattice are part of the kit. Variable buildable up to a height of 75cm. Suitable among other things for art. 17095/17096 exhaust system

Kit H0 (1:87)                                                                    large pipe bridge                                                             Dimensions in mm: L 150 x W 37.5 (+ catwalk 11) x H 37.5 

Steel truss, side walkway with fine openwork lattices. Can be extended as required.

The tubes are guided by a grid, this allows the laying of tubes in variable sizes, from < 6,5mm Ø to max 30mm Ø.

We offer suitable supports such as lattice girders under accessories, or with our belt bridge system.

Material shelter kit H0

Very fine half-timbered with finely engraved brick. Brick fields and half-timbering inside and out. 2 small attachments, can also be positioned separately. Barrel storage for two barrels. Barrels and decoration are not included in the kit.

Dimensions in mm L 185 x W 48 x H 37.5

Kit H0 (1:87)                                                                                                             L 53 x W 43 x H 28mm                                                                                         transformer house, brick

With fine openwork ventilation grids, small building suitable for industrial, railway and urban areas.

L 53 x W 43 x H 28mm

N gauge kit (1: 160). Architecturally based on the Zollern colliery. Green steel framework with dark brick.
Dimensions in mm: L 231 x W 127 x H 110

Kit H0 (1:87)

Bansen for bulk materials                                                  Dimensions in mm: L 164 x 98 x 31

Wooden planks with scale grain elaborately engraved on both sides. Such bans were used as coal bans at railroad stations, but are still used on farms, recycling yards, depots, etc. 

kit H0 (1:87)  length 430mm, width 85mm, height 270mm