Print

Industry


Display per page
Sort by
1 - 50 of 207 results
Product no.: 17001

kit H0 (1:87) Woodshed

Dimensions: length 115 mm, width 83mm, height 57mm

Typical wooden shack as it is often found in industrial areas or on factory premises. Ideal as an office/warehouse for construction companies, junkyards or other small business. Can of course also serve other purposes, the imagination have no limits here.

19.90

In stock
can be shipped within 10 days

Product no.: 17002

Kit H0 (1:87) tin shed, in mm: length 92, width 72, height 36

The prototype of this shed is on the Coal mine, "Zollern", it is a machine for winding and unwinding of the shaft parts. Ideal can also be used as a backyard workshop or storage sheds on factory premises.

15.80

In stock
can be shipped within 10 days

Product no.: 17003

Kit H0 (1:87), Truck scale Dimensions: length 77mm, width 52mm, height 40mm. The dimensions of the weighing surface: length 100mm, width 33mm, height of 0.8 mm

 A truck scale used to belong to any factory system and every major freight yard. In the cities there were public scales for coal merchants and hauliers. Often served as the weighing cottage and gatehouse was the direct entrance to a factory or industrial plant.

15.80

In stock
can be shipped within 10 days

Product no.: 17004

Factory / steel building, kit in H0 (1:87), Dimensions: length 305mm, width 164mm, height 145mm

The original building for this factory was located in Krähwinklerbrücke. Carl Urbach produced several high-alloy steels. The model is very delicate and detailed. Assembly is made easy with our tried-and-tested mortise technique. Since the model is to scale, it is possible to realise typical interiors and/or lighting.

Interiors/lighting not included.

97.70

In stock
can be shipped within 10 days

Product no.: 17005

Crane bridge, kit H0 (1:87), Dimensions: length 275mm, width 80mm, height 155mm

The original was located in Krähwinklerbrücke, as part of Carl Urbach's hammer mill with rail access. The crane lifted up to 60 tons.

Delicate steel framework

Combined with the included scoop, the crane also works for bulk cargo/coal loading.

53.60

In stock
can be shipped within 10 days

Product no.: 17007

Industrial chimney, kit H0 (1:87), Dimensions: length 30mm, width 30mm, height 251mm

Square chimneys used to be very common. Versatile kit for all industrial purposes, ideal addition to Carl Urbach steel works. Ready for a Seuthe smoke generator (not included).

21.60

In stock
can be shipped within 10 days

Product no.: 17008

Administration „Stahl Wille“, kit H0 (1:87), Dimensions: length 220mm, width 175mm, height 200mm

 

The original, built in 1910, still exists in Wuppertal-Cronenberg and serves as the head office of a world renowned tool factory. With its distinctive portal this administrative building has an almost sacral character, and is a typical expression of the emergent industries of the late 19th  and early 20th century.

Elaborate facade with strong depth effect, a veritable highlight of laser cut technology. Many parts and complex structures make this a craft project for the ambitious model builder.

Multiple uses, such as administration, school or city hall.

134.40

In stock
can be shipped within 10 days

Product no.: 17009

kit H0 (1:87), Dimensions: length 77mm, width 52mm, height 40mm

Corrugated iron shack/office

Plain corrugated iron building, as a small office for a scrap dealer or similar small businesses.

12.10

In stock
can be shipped within 10 days

Product no.: 17010

Headframe pit I/II, kit H0 (1:87), Dimensions: length 370mm, width 240mm, height 480mm

Replica of the winding tower of pit I/II of the „Minister Achenbach“-colliery in Lünen. Building started in 1897, finally closed down in 1992.

Elaborately etched rivets. Industrial stairs with cut-work grid structure.

130.20

In stock
can be shipped within 10 days

Product no.: 17011

Pit bank „Minister Achenbach“-colliery, kit H0 (1:87), Dimensions: length 305mm, width 210mm, height 223mm

Replica of the pit bank  I/II of the „Minister Achenbach“-colliery in Lünen. Building started in 1897, finally closed down in 1992. Fits perfectly with winding tower (article no. 17010). The intermediate floor is prepared to accomodate rotary tippler (article no. 40026).

85.10

In stock
can be shipped within 10 days

Product no.: 17012

Fan/blower „Zollern“-colliery, kit H0 (1:87), Dimensions: length 100mm, width 80mm, height 60mm

These air turbines were located at the downcast shafts, to provide air circulation underground. The original still exists at „Zeche Zollern“ and is completely made out of metal. Kit is made up of 8 elements.

48.30

In stock
can be shipped within 10 days

Product no.: 17013

Cooling tower, kit H0 (1:87), Dimensions: length 170mm, width 120mm, height 340mm

Cooling towers like this were widely used to cool down water. Water trickles down within the tower, into a collection tank at the bottom. Steel works, colliery, power plant. They all need their cooling tower.

92.40

In stock
can be shipped within 10 days

Product no.: 17014

Machine house „Minister Achenbach“-colliery, kit H0 (1:87), Dimensions: length 277mm, width 172mm, height 170mm

These machine houses contained the machinery for the hoist cables. To be true to the original, two should be placed alongside. Although this model replicates the actual machine house, it can be used for several applications within factory/industry settings. Please also consider articles 17010 Pit bank and 17015 Coal washery.

86.10

In stock
can be shipped within 10 days

Product no.: 17015

Coal washery, kit H0 (1:87), Dimensions: length 375mm, width 140mm, height 320mm

 

Typical coal washers, elevated to facilitate tracks. Here the coal was washed and sorted before being loaded into coal wagons. Narrow construction, can also be used as background scenery.

Kit includes water tank. Versatile, functional building

94.50

In stock
can be shipped within 10 days

Product no.: 17016

Power house, kit H0 (1:87), Dimensions: length 230mm, width 140mm, height 130mm

This building was the power centre for Schürmann & Schröder, a cloth factory in the Wupper valley. It provided electricity and drove the transmissions. The kit is universally applicable for any kind of factory. Several buildings can easily be put alongside each other.

74.60

In stock
can be shipped within 10 days

Product no.: 17017

Large cooling tower, kit H0 (1:87), Dimensions: length 190mm, width 190mm, height 300mm

Elaborate cooling tower in wood etching. The original still exists at „Kokerei Hansa“, and is currently being renovated. See original photo.

Attention: the carton used is vapour oil proof, thus can be used with steam generators without de-coloring or disintegrating the material.

102.00

In stock
can be shipped within 10 days

Product no.: 17018

Headframe pit IV, kit H0 (1:87), Dimensions: length 230mm, width 155mm, height 350mm

 

The construction of this winding tower is based on the one at the „Minister Achenbach“-colliery, pit IV. With its small height and reasonable dimensions well suited for smaller layouts or colliery dioramas. Includes the usual high quality with numerous details, such as the stairs with cut-work grids. One for the „rivet-counters“.

Fits with article 17025 Ground pit bank.

98.00

In stock
can be shipped within 10 days

Product no.: 17019

Turning shop Mülheim base kit, kit H0 (1:87), Dimensions: length 235mm, width 135mm, height 125mm

The original, part of the local repair works, still exists in Mülheim. It is a listed building and is being extensively refurbished. The base kit consists of the gables walls and outside walls with 6 windows and can be built on its own. Elaborate brick facades, true to the original roof structure, „plaster“-finish on the inside walls, very delicate windows. Can be extended with other kits (articles no.17020/17021/17021).

86.00

In stock
can be shipped within 10 days

Product no.: 17020

Turning shop Mülheim width extension, kit H0 (1:87), Dimensions: length 235mm, width 98mm, height 115mm

This kit extends on the base kit. As in the original, the extension has a slightly different gable shape than the base. Extension can be added on right or left side.

Base kit (17019) and extension total dimensions: length 235mm, width 223mm, height 125mm

47.30

In stock
can be shipped within 10 days

Product no.: 17021

Turning shop Mülheim length extension, kit H0 (1:87), Dimensions: length 225mm, width 135mm, height 125mm

This kit extends the base kit by 6 windows, any desired number of extensions is possible. The original has 18 windows.Can only  be built in connection with article no. 17019!

 

49.50

In stock
can be shipped within 10 days

Product no.: 17022

kit H0 (1:87)

This set can be used to add a fourth base to articles 17019, 17020 and 17021. The kit can only be used in combination with the other articles.
In combination with these kits, the following dimensions in mm result: length approx. 460, width approx. 223, height approx. 125.

25.20

In stock
can be shipped within 10 days

Product no.: 17023

Coal dispatch, kit H0 (1:87), Dimensions: length 230mm, width 172mm, height 200mm

Reconstructed from an old photograph, original location unknown. Coal is delivered and dispatched via a chute and conveyor bridge (article no. 17030ff) into wagons. Kit with many small details, cut-work stairs, etched gusset plates, elaborate skylights, delicate pillars, decorated with „plaster“ inside. Centre-to-centre distance for tracks 74mm, both right and left hand sides fit another track with the same distance.

85.00

In stock
can be shipped within 10 days

Product no.: 17024

Coal washery brick, kit H0 (1:87), Dimensions: length 375mm, width 140mm, height 320mm

Similar to article no.17015, but with brick-/steel framework. An impressive building, can also serve as background scenery due to its narrow diemnsions.

Kit includes water tank. Versatile, functional building.

104.00

In stock
can be shipped within 7 days

Product no.: 17025

Ground pit bank, kit H0 (1:87), Dimensions: length 170mm, width 142mm, height 98mm

As article no.17018, not overly large, but constructed to original scale. A ground pit bank, as opposed to „normal“ pit banks, stands on the gound, as the name suggests. Usually coal would not have been sorted or treated any further here; instead it is transported via conveyor belts or cableways.

35.00

In stock
can be shipped within 10 days

Product no.: 17026

Octagonal chimney, kit H0 (1:87), Dimensions: length 60mm, width 60mm, height 402mm

This unusual, rated building (1869) still exists and is located in Kelbra (Thuringia). It belongs to a brewery. 

44.00

In stock
can be shipped within 10 days

Product no.: 17027

Small factory building, kit H0 (1:87), Dimensions: length 170mm, width 142mm, height 98mm

Small factory building with mansard roof, same construction as 17025, closed roof, can be used to extend 17025 or other industrial purposes.

34.70

In stock
can be shipped within 10 days

Product no.: 17028

Barrel roof factory, kit H0 (1:87), Dimensions: length 129mm, width 87mm, height 55mm

The original building was located on the premises of cloth factory „Schürmann & Schröder“ until the early 2000s.

The halls can be placed individually or as half relief. Very intricately etched „plaster“-facade.

32.60

In stock
can be shipped within 10 days

Product no.: 17029

Square chimney, kit H0 (1:87), Dimensions: length 30mm, width 30mm, height 251mm

Ideal for 17019 „Turning shop Mülheim“ or 17004 „Steel works Carl Urbach“, now in dark red brick finish. (bright red art. 17007) Goes well with any other industrial buildings or small factories

21.50

In stock
can be shipped within 10 days

Product no.: 17030

Conveyor bridge straight, kit H0 (1:87), Dimensions: length 300mm, width 30mm, height 36mm

Conveyor bridges are essential for coal pits, power and coking plants, mining- and quarrying operations. Material is transported via conveyor belts to the various production sites. Models can be combined individually to accomodate versatile applications. Steel elements in „welded“ finish without rivets.

20.00

In stock
can be shipped within 10 days

Product no.: 17031

Conveyor bridge sloped, kit H0 (1:87), Dimensions: length 160mm, width 30mm, height 36mm. Height difference 75mm

Conveyor bridges are essential for coal pits, power and coking plants, mining- and quarrying operations. Material is transported via conveyor belts to the various production sites. Models can be combined individually to accomodate versatile applications. Steel elements in „welded“ finish without rivets.

12.60

In stock
can be shipped within 10 days

Product no.: 17032

Conveyor bridge turning tower 180°, kit H0 (1:87), Dimensions: length 125mm, width 65mm, max. height 280mm

Conveyor bridges are essential for coal pits, power and coking plants, mining- and quarrying operations. Material is transported via conveyor belts to the various production sites. Models can be combined individually to accomodate versatile applications. Steel elements in „welded“ finish without rivets.

20.00

In stock
can be shipped within 10 days

Product no.: 17033

Conveyor bridge turning tower 180°, kit H0 (1:87), Dimensions: length 125mm, width 65mm, max. height 280mm

Conveyor bridges are essential for coal pits, power and coking plants, mining- and quarrying operations. Material is transported via conveyor belts to the various production sites. Models can be combined individually to accomodate versatile applications. Steel elements in „welded“ finish without rivets.

24.20

In stock
can be shipped within 10 days

Product no.: 17034

Conveyor bridge support element 75mm, kit H0 (1:87), Dimensions: width (ground) 45mm, height 75mm

Support element for conveyor bridge system. Conveyor bridges are essential for coal pits, power and coking plants, mining- and quarrying operations. Material is transported via conveyor belts to the various production sites. Models can be combined individually to accomodate versatile applications. Steel elements in „welded“ finish without rivets

7.40

In stock
can be shipped within 10 days

Product no.: 17035

Conveyor bridge support element 225mm, kit H0 (1:87),
Dimensions: width (ground) 70mm, height 225mm

Support element for conveyor bridge system. Conveyor
bridges are essential for coal pits, power and coking plants,
mining- and quarrying operations. Material is transported
via conveyor belts to the various production sites. Models
can be combined individually to accomodate versatile
applications. Steel elements in „welded“ finish without
rivets.

12.60

In stock
can be shipped within 10 days

Product no.: 17036

Conveyor bridge straight, wide, kit H0 (1:87), Dimensions:
length 252mm, width 60mm, height 36mm

Conveyor bridges are essential for coal pits, power and

coking plants, mining- and quarrying operations. Material is
transported via conveyor belts to the various production
sites. Models can be combined individually to accomodate
versatile applications. Steel elements in „welded“ finish
without rivets.
Same as 17030, but 60mm wide.

20.50

In stock
can be shipped within 10 days

Product no.: 17037

Conveyor bridge starter building, kit H0 (1:87), Dimensions:
length 65mm, width 60mm, height 55mm

Conveyor bridges are essential for coal pits, power and
coking plants, mining- and quarrying operations. Material is
transported via conveyor belts to the various production
sites. Models can be combined individually to accomodate
versatile applications. Steel elements in „welded“ finish
without rivets.

11.60

In stock
can be shipped within 10 days

Product no.: 17038

Boiler house, kit H0 (1:87), Dimensions: length 220mm,
width 195mm, height 190mm

Large boiler house, as located at the railway yard in Düsseldorf.

86.00

In stock
can be shipped within 10 days

Product no.: 17040

Furnace plant, kit H0 (1:87), Dimensions: length 490mm,
width 345mm, height 770mm

Furnace plant, kit H0 (1:87), Dimensions: length 490mm,
width 345mm, height 770mm
1951 – 2011, 60 year anniversary of European Coal and
Steel Community (Montanunion). Large blast furnace
ensemble, consisting of:
Blast furnace, Furnace plant, Winch house and dust plant.
All parts carton, except tubings (PVC). Up to 3 tracks can
be laid through the ensemble. 74mm center to center
distance, 75mm vertical clearance. Winch house includes
detailed stair tower with cut steps. Underground bunker for
dispatch. Tracks can be laid underneath dust plant, vertical
clearance 75mm. Other kits can be used to complete steel
works: tube bridges, conveyor bridges, factory buildings

457.00

In stock
can be shipped within 10 days

Product no.: 17041

Gas wash, kit H0 (1:87), Dimensions: length 490mm, width
160mm, height 475mm

Suitable for Blast furnace ensemble 17040 – 17048. Herethe furnace gas is cleaned and sent back into the system.Track clearance under dust plant and cyclone

293.00

In stock
can be shipped within 10 days

Product no.: 17042

Furnace plant, kit H0 (1:87), Dimensions: length 750mm,
width 880mm, height 850mm

As 17040, double version. Clearance for 6 tracks.

819.00

In stock
can be shipped within 10 days

Product no.: 17043

Winch house, kit H0 (1:87), Dimensions: length 145mm,
width 65mm, height 290mm

Winch house to expand on steel works, with elaborate stair
tower. Underground bunker for material dispatch

58.00

In stock
can be shipped within 10 days

Product no.: 17044

Dust plant, kit H0 (1:87), Dimensions: length 60mm, width
60mm, height 235mm

Dust plant to expand on steel works. Clearance for tracks,
vertical clearance 75mm.

29.40

In stock
can be shipped within 10 days

Product no.: 17045

kit H0 (1:87), Dimensions: length 112,5mm, width 65mm, height 8mm

Underground bunker extension for steel works or other industrial purposes

8.20

In stock
can be shipped within 10 days

Product no.: 17046

 kit H0 (1:87), Dimensions: length 59mm, width 26mm, height 2240mm (floor height 36mm)

This stair tower provides outdoor access to factories or

other high buildings. Intricate details on steps and
walkways, cut grid to scale.

The building is not included

27.30

In stock
can be shipped within 10 days

Product no.: 17047

Lift for stair tower, kit H0 (1:87), Dimensions: length 63mm,
width 44mm, height 295mm

Fits with stair tower 17046. Exits can be individually placed,
modular construction to accomodate different building
height

33.60

In stock
can be shipped within 10 days

Product no.: 17048

Circular thickener, kit H0 (1:87), Dimensions: diameter
153mm, height 78mm

Adjacent building with stairs: length 100mm, width 42mm
Treatment plant to separate liquids from solids. Used in
sewage plants, but also in many other industrial contexts,
like blast furnaces or coal pits.

38.40

In stock
can be shipped within 10 days

Product no.: 17049

 kit H0 (1:87), Dimensions: length 303mm, width 158mm, height 135mm

The original is located in Düsseldorf-Oberbilk, within the
railway yard. Fits perfectly with boiler house 17038 and the
kits from B&K (Bachmann & Kochendörfer).

75.00

In stock
can be shipped within 10 days

Product no.: 17055

Cellular cooler, kit H0 (1:87), Dimensions: length 50mm, width 50mm, height 95mm, contains 2 pcs.

Very intricate grid windows. Liquid coolants are re-cooled
here, within a closed system. Necessary for almost all large
industrial plants, power stations, blast furnaces, coking
plants. Can be extended with any desied number of coolers.
Contains 2 coolers with safety ladder, and roof railings

20.00

In stock
can be shipped within 10 days

Product no.: 17056

kit H0 (1:87), Dimensions: length 420mm, width 195mm, height 435mm

Fits with blast furnace ensemble 17040 - 17048

 

293.00

In stock
can be shipped within 10 days

Product no.: 17057

kit H0 (1:87), Dimensions: length 105mm, width 105mm, height 180mm

Fits with Cowper stove 17056. Some Cowper stoves hadthose water tanks added to the top.

25.80

In stock
can be shipped within 10 days

1 - 50 of 207 results